Fix the problem: CHKDSK Reports RAW

Fix the problem: CHKDSK Reports RAW

Geeks - If CHKDSK is reporting that the file system is RAW, it means that the file system is not recognized or is corrupted. There are a few steps you can take to try and fix this problem:

Run CHKDSK again to see if it can repair the file system. To do this, open the command prompt and type chkdsk /f followed by the drive letter of the disk that you want to check. For example, chkdsk /f C:

If CHKDSK is unable to repair the file system, you may need to use a data recovery tool to try and recover the data on the disk. There are many different data recovery tools available, so you will need to choose one that is suitable for your situation.

If you are unable to recover the data, you may need to format the disk and start over. This will erase all data on the disk, so be sure to back up any important files before proceeding.

If the problem persists, the disk may be damaged and will need to be replaced. In this case, you will need to purchase a new disk and install it in your computer.

I hope this helps! Let me know if you have any other questions.