Ad Under Header

How to Clone 128GB SSD to 256GB SSD within Few Clicks?

How to Clone 128GB SSD to 256GB SSD within Few Clicks?

How to Clone 128GB SSD to 256GB SSD within Few Clicks?

Geeks - To clone a 128GB SSD to a 256GB SSD, you will need a few things:


A computer with an available SATA port that can accommodate both the 128GB and 256GB SSDs.

A SATA cable to connect the 128GB and 256GB SSDs to the computer.

A cloning software, such as EaseUS Todo Backup, Acronis True Image, or Clonezilla.

A screwdriver to remove the 128GB SSD from your computer and install the 256GB SSD in its place.

Once you have all of these things, follow these steps to clone your 128GB SSD to your 256GB SSD:


Back up all of the data on your 128GB SSD. This is important because the cloning process will overwrite all of the data on the 256GB SSD, so you want to make sure you have a copy of your important files.

Shut down your computer and unplug any cables or peripherals.

Use the screwdriver to remove the 128GB SSD from your computer and install the 256GB SSD in its place.

Connect the 128GB SSD to the computer using the SATA cable.

Power on the computer and open the cloning software.

Follow the instructions in the cloning software to clone the 128GB SSD to the 256GB SSD. This process will typically involve selecting the 128GB SSD as the source drive and the 256GB SSD as the destination drive. The cloning software will then copy all of the data from the 128GB SSD to the 256GB SSD.

Once the cloning process is complete, shut down the computer and unplug the 128GB SSD.

Install the 256GB SSD in your computer and power on the computer. It should boot up as if it were the 128GB SSD.

Note that the exact steps for cloning a 128GB SSD to a 256GB SSD may vary depending on the cloning software you are using. Refer to the instructions for your specific software for more detailed instructions.





Tags:
Article
Top ad
Middle Ad 1
Parallax Ad
Middle Ad 2
Bottom Ad
Link copied to clipboard.